Close
You have no items in your shopping cart.
Search

Timney Triggers® 3LB Pull Weight FN SCAR Trigger Black Not Adjustable

A drop in, complete assembly trigger

The trigger is factory tuned for pull weight, with no creep

The trigger makes use of your rifle's original hammer/trigger pivot pins

Single stage trigger

  • No gunsmith needed, easy to install
  • Ready for the range, no adjustments needed
  • No additional parts needed to install trigger
  • Crisp feel

TECH TIPS

FN SCAR Disconnect Adjustment:

The Disconnect adjustment screw controls the engagement of the trigger. The purpose of the disconnect is to prohibit your rifle from doubling by controlling the amount of overlap between the two hooks; one on the hammer and one on the trigger (The disconnect).

To adjust the distance you will loosen the nut and using a .050 Allen wrench turn the screw either clockwise or counter clockwise depending on the issue. If the trigger is not resetting you will turn the screw 1/8 of a turn clockwise. When the hammer is pushed past the point of cocking the two hooks should be as close as possible without making contact.

If the trigger is doubling you will turn the screw counter clockwise to reduce the amount of distance. When the hammer is pushed past the point of cocking the two hooks should be as close as possible without making contact. Every Timney trigger comes with a lifetime warranty and if necessary you can send the trigger to Timney for Warranty Repair.

Timney Triggers 2020 West Quail Ave. Phoenix, AZ 85019

Tech Guide Downloads

FN-SCAR-Disconnect-Adjustment.pdf

INSTRUCTIONS

scar-trigger-instructions.pdf

THIS TRIGGER WORKS WITH THESE RIFLES:


All Scar-L Models
 

 

 

Write your own review Close Review Form
  • Product can be reviewed only after purchasing it
  • Only registered users can write reviews
*
*
Bad
Excellent
*
*
*
This product is sold out